Used Equipment
2020 Linde H30T
Serial Number: H21202X03797
Engine Hours: 1587
Specifications
| Brakes | Wet Disc |
| Power Mode | Diesel |
| Engine | BEU |
| Horsepower | 58.0 hp |
| Engine Manufacturer | VW |
| Cylinders/Displacement | 4/120 |
| Relief Pressure Hyd | 2900.0 |
| Lowered Overall Height | 86.5 in |
| Standard Mast: Free Lift | 56.0 in |
| Maximum Fork Height | 183.5 in |
| Mast | 3-Stage |
| Steering | Hydrostatic |
| Transmission | Hydrostatic |
| Number of Speeds | 1/1 |
| Fork Size (T x W x L) | 1.75 X 5 X 42 in |
| Front Overhang | 17.5 in |
| Height to Top Overhead Guard | 87.0 in |
| Minimum Aisle Right Ang Stack | 113.7 in |
| Overall Length | 108.5 in |
| Overall Width | 49.4 in |
| Tread (Front/Rear) | 39.7/36.7 |
| Wheelbase | 76.0 in |
| Center of Wheelbase | 6.8 in |
| Steer Tire Size | 23 x 9-10/16PR |
| Drive Tire Size | 27 x 10-12/20PR |
| Lift Capacity | 6000.0 lbs |
| Maximum Drawbar Pull | 4449.0 lbs |
| Load Center | 24.0 in |
| Travel Speed Loaded | 13.0 mph |
| Gradeability Loaded @ 1 mph | 27.0 percent |
| Max Fork Height Rated Capacity | 165.0 in |
Financing Options
We offer best in class financing for new and used equipment. Not sure what you may qualify for, reach out to our financing team today to get pre-approved at the lowest rate possible.
Learn MoreSpecifications and images may vary in accuracy.
Data Powered By EquipmentWatch
Related Equipment
2018 Linde H25 IC Pneumatic Forklift 3-Stage
Hours: 5345.5
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
2019 Linde H30T / 393-02
Hours: 7047.5
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
Horsepower: 58.0 hp
Maximum Fork Height: 183.5 in
2017 CLARK C30 IC Pneumatic Forklift
Hours: 10000.0
Horsepower: 59.0 hp
Maximum Fork Height: 189.0 in
Horsepower: 59.0 hp
Maximum Fork Height: 189.0 in